Silicone sealant is used for sealing a number of surfaces. However, silicone sealant remover has to be used if one wants to get rid of the silicone caulk. Although you can use other different methods for removing silicone caulk, this is by far the easiest method.
Silicone sealant is a household adhesive which is used to seal a number of household items. They are used in home improvement projects in bathrooms, kitchens and floors, among others. The main advantage of a silicone sealer is that it remains flexible in a variety of conditions. It creates an impenetrable bond and repels water as well as air.
Therefore, in spite of years of exposure to water and other elements, the sealant remains in place. Removing the sealant is, therefore, not an easy task–in most cases, a sharp razor-like object is used for this purpose. Till the silicone caulk is not cured, it is rather easy to remove the sealant, but once it is cured, one will have to opt for a chemical remover to do the job well.
Silicone Sealant Remover Review
Removing the sealant depends on the surface on which it was used. It is important to use the right safety gear when getting rid of the sealant–make sure you have safety glasses and rubber gloves handy.
Evo Stik
This is one of the best removers which can be used for removal of silicone caulk. It is able to remove the caulk after the sealant has been cured, and give a silicone-free surface. It can be used for all types of silicone sealants. It is quick and easy to use, and will not take more than 20 to 30 minutes to make the surface silicone free.
UniBond
When you are using this caulking remover, you will see that you do not have to spend a lot of time on getting the work done. It is not just fast, but also effective and easy to use. It is able to remove very old silicone caulk, and give you a clean plain surface. If the sealant is deep, then you may have to repeat the process again. It does not cause any harm to the surface on which it is used.
Motsenbocker’s Spray Silicone Latex Caulk and Foam Sealant Remover
This adhesive removal product makes use of a patented formula. It is a water based and biodegradable formula which can be used without having to worry about safety. One can not only use it on a variety of surfaces, but also on clothes, fabrics and upholstery. It works on fresh, as well as cured silicone caulk. It can also be used for removing other adhesives as well.
Geocel
It is a gel which can be used for removing unwanted cured silicone caulk. You can use this sealant remover to get rid of the adhesive from sanitary ware, door or window frames, worktops, etc. One can also make use of this remover to get rid of cured sealant, which was placed on the product by mistake. It is easy to use and one will not have to spend a lot of time in the removal process.
When you are using the remover to get rid of silicone sealant, make sure your eyes and your skin is well protected. When you are working indoors, it is best to have all the doors and windows open, which will facilitate adequate ventilation. Apply the remover on the caulk. Use an acid brush to coat the sealant with the remover. Let the remover penetrate into the sealant, for the amount of time recommended by the manufacturer, before you scrap the sealant using a putty knife. If required use another coat of the remover.