If you want to undertake any home improvement project, you will want to know where are the studs located. The stud finder reviews given below will prove to be of help to you. Scroll down…
There comes a time, when we may have to locate a stud in our home. It can be a stud in the wall or in the ceiling or on the floor. There can be many different reasons as to why would you want to find a stud at home. You may want to screw the mounts into solid wood for support. On the other hand, you may want to hang cabinets on a wall or you may want to hang a mirror, etc. as a part of home improvement project.
All of us are aware that to make a house, a skeleton of wood studs, beams, etc. is required. The walls are then covered with drywall, paneling, plaster, etc. When you want to make changes to your house, comes the question how would you find a stud. You can make use of stud finders for the same, but then comes the question which is the best one. The reviews that follow will prove to be of help to you in finding the right machine for you.
Best Stud Finder
There are simple methods, which can be used to find studs in the walls, ceilings or floors. You can make use of your knuckles to tap on the wall and listen to the changes in the sound. When the hollow echo makes a pronounced and solid thud, then you can understand that you have found a stud location. The other method, which is commonly used is the use of magnets. If you want to locate a solid spot for hanging a picture, move a strong magnet on the specific area. If the magnet is sufficiently strong, then you will be able to feel a strong pull. However, these methods are not full proof. Therefore, the electronic stud finders have come into the picture.
Zircon MultiScanner i700 OneStep
The display of this product is what attracts people to it. As soon as a stud id spotted the machine displays the same on the screen. There is also a built-in pencil in it. Once the stud has been found, you will have to press a button and the center of the stud will be marked by the pencil. One can use this on walls, ceilings, etc. which are 1.5 inches in thickness. However, if there is a second sheet of drywall on the original wall, then the stud finder will not be able to find the stud.
Simplified Stud Sensor
This product does not have a display. It rather uses LEDs. As soon as it encounters a stud, the LEDs illuminate from bottom to top. A sensor sound is also made. One can make use of the pencil provided with the sensor to mark the location of the stud. There is a deep scan mode with which one can find studs at a depth of 1 ½ inch as well.
Stanley FatMax Stud Sensor 400
If you would rather want a display on the stud sensor, then you can opt for this product. However, one of the problems with this sensor is that the display is difficult to interpret. At the same time, when you are using the device you will have to keep a steady hand. You will be able to get accurate readings up to 1/8 inches. If the hand moves closer to the sensor, it may give wrong results.
This was the review of some of the best stud finders found in the market. It is important that you are able to use them properly, else you may not get accurate results. It is best to opt for those ones, which are easier to operate. As far as possible, you will not want to opt for manual set functions. The manual set functions can make your job really difficult.