Berber carpet cleaning is not that difficult, provided you are aware of the correct techniques to be used. This article will give you the right guidance tips regarding the same.
Earlier, berber carpets were made of wool. However, now they are available in various synthetic materials like nylon and olefin. The uniqueness of this carpet is in its weaving, that consists of small, dense loops. Originally, it was designed in this way to look like natural woven grass. There are a number of advantages of using this carpet as a floor covering option. They are available in so many varieties and styles to suit the specific needs of homeowners. This looped carpet has high durability, and hides footprints and vacuum marks very well. As compared to any other carpet, this one does not accumulate much of dirt, and thus, cleaning it is easier.
Tips for Cleaning Berber Carpets
There are several cleaning methods that are used to get rid of the dirt, debris, and spills. Here are a few simple tips that will help you clean the carpet and maintain its attractive look:
Tips #1: The vacuum cleaner used for the purpose of carpet cleaning should have good suction power. Avoid using beater bar and brush of the vacuum, as they can cause damage to the loops of the carpet.
Tips #2: Berber carpets should be vacuumed more frequently as compared to the other types. This is because, the dirt and debris stay on the carpet for quite a long time, as its fibers are tightly woven. Therefore, if the surface is regularly cleaned with a vacuum cleaner, you do not have to go for deep cleaning quite often.
Tips #3: The cleaning method to be used largely depends on the carpet. You cannot use water or any other liquid substance for cleaning woolen carpets, as their fibers can get damaged. You have to buy a dry cleaning kit for this purpose. A dry cleaning machine and a dry cleaning chemical comes with this kit, which should be used to clean small, dirty spots.
Tips #4: For a deeper cleaning of berber carpets made of synthetic fibers, steam cleaning is recommended. It should be done once in a year, in order to extract the dirt and debris accumulated deep inside the carpet. In this process, a hot water-based cleaning agent is forced into the fibers of the carpet under high pressure, and then it is drawn out along with dirt and debris.
Tips #5: After steam cleaning, you will find large amount of water trapped in the fibers. Therefore, the carpet should be dried thoroughly by making a number of vacuum passes. This step is essential, because the trapped moisture promotes the growth of mold which can badly damage the carpet.
Tips #6: If there is a liquid spill on the carpet, try removing it as soon as possible so that the stain does not get the scope to settle down. Firstly, use a spoon to scoop out maximum liquid. Then take a soft, absorbent cloth, and place it over the spill to soak as much liquid as you can. You may have to repeat this a number of times till the carpet turns dry. Never rub the cloth on it, as it will spread the stain deeper into the carpet. To clean up the residue, vacuum the area.
Tips #7: For stubborn stains, you can prepare a homemade carpet cleaning solution, and apply it over the area. Mix hydrogen peroxide, vinegar, and baking soda. Use this mixture for carpet stain removal. Wait for few minutes, and then blot the solution with a paper towel. Finally, steam clean the area.
The task of cleaning berber carpets can be made easier if you minimize the accumulation of dust and dirt on them. This can be done by placing area rugs near the entrance, and also on all those locations where there is high foot traffic. These rugs will hold the large amount of dirt and grime, brought into the house from outside. Moreover, make a rule that nobody should step onto the carpet while wearing shoes.